• Kameratechnik

Product Camera - Camera Technology

BNC Easy Click

Film Shoots are a dynamic affair: constant rebuilding is necessary, and using a BNC cable is not different. Connector in - connector out - and at some point, the female connector in the camera gets ripped out. It's high time that the pioneers in technology at Hase-Inno-Tech were called into action!

The magnetic connector makes attaching the cable to the camera effortless. The connection is strong enough to hold without any help, and is even capable of withstanding jerks on the cable. But it is also easy to remove, with a small tuning motion on the connector all that's needed. The connection will also break if the puss is stronger, meaning the female connector remains intact.

The basic version consists of a ring for mounting on the camera and the cable connector. The exterior of the connector is knurled to provide a better grip, and to make it easier to hold. The magnets' poles are opposed, meaning that a slight turning motion is enough to effortlessly break the connection.
With some camera types the BNC connections are inverted, meaning that an adaptor is necessary. For some configurations it can be useful if the cable is led out either to the left or the right. There is also a 90° angle connector on which the BNC Easy Click can be mounted.

Assembly is very easy. Simply place the ring over the cable connector and use the Allen key provided to tighten the screw.

Request now

RTMotion Monitor Mount

The RTMotion Monitor Mount is build of a RTMotion Handheld and a WCU 4 Monitor Mount. The Handheld improves the grip of the RTMotion in the hand, the WCU 4 allows the monitor to be raised, tilted and fixed in the desired position. Both are very sturdy thanks to its metal construction. The adapter is attached to the wireless focussing system with two screws; 1/4” or 3/8” monitor screw connections are provided for. The wireless transmission remains unaffected.

Request now

WCU 3/4

The WCU 3/4 monitor adapter enables attachment of a monitor to the top of the WCU unit. The adapter is very sturdy thanks to its metal construction, and allows the monitor to be raised, tilted and fixed in the desired position.

The adapter is attached to the wireless focussing system with two screws; 1/4” or 3/8” monitor screw connections are provided for. The wireless transmission remains unaffected.

WCU 3

Weight WCU 3 - 165 g

Request now

WCU 4

Weight WCU 4 - 130 g

Request now

The Flatbase Screw Nut Wrench Set

Now there is a way to easily tighten and loose the flatbase screw nuts at difficult positions: The Flatbase Screw Nut Wrench Set from H.I.T.

It contains a handle and four screw wrenches (Partition 8/6/5/4) which can be exchanges and Extended with common 1/2" coupling devices.

Request now

Hang Me Up

The HMU is a helper to insert cameras to easyrigs. It consist of a bolt which is to mount on the easyrig, and a hull you fix at the camera. To hook, the hull needs to get inserted in the bolt, to hang the mounted camera out, press the head. The HMU was tested up to 80kg.

Request now

Ground Level

The Ground Level is an exceptionally flat pan option for cameras. Its height of 105mm allows the camera to be placed almost directly on the ground.

From this vertical position of 0°, the camera can be moved vertically by up to +90° and then fixed. A completely horizontal 360° pan is nonetheless possible. The integrated shifting plate allows the camera to be rotated by 180° on ground level and a vertical pan from 0° to -90°.

In order to achieve a stable base, the swivel unit is mounted onto a 500 x 300mm anti-slip, multiplex screen plate. An easily replaceable gas-filled shock absorber facilitates vertical movement. This allows the Ground Level to be positioned and adjusted simply, quickly and effortlessly.

Request now

Long off-set arm

This long off-set arm is compatible with all other manufacturers adapter plates, ie. G-F.M. The off set additionally includes 6 x 3/8 inch Mounting threads. You can choose, whether you want to buy the off-set arm as stand alone, with Mitchell Mount, with bowl adapter 150mm or with bowl adapter 100mm. Naturally this off-set arm is machined from a block of aluminium and hard-coated.

Request now

Mitchell Mount

Request now


Tripod Adapter 150mm

This tripod adapter is turned and machined from solid aluminium. It contains thread for example to directly bolt on a Euro-Mount. Additionally there are 2 x 3/8 inch screws to directly Mount a base plate.

Request now

Bowl Adapter 150mm

Request now

Locking Nut

Our locking nut is made of Polyacetal and stainless steel. It is very easily fastened with the inner ball bearings. The locking nut can also be purchased individually.

Request now